Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
CRUSH HAZARD. Do not use fork positioning to push or pull objects or load. Failure to
comply could cause object or load to fall.
Operation:
• Travel in accordance with requirements set forth in Section 1—General Safety
Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
31211031
WARNING
Section 5—Attachments
5-23