•
Appliance is being restored from a backup file
•
Appliance is being reset to factory default settings
Commands
The body of the main menu contains commands that can be used:
•
To view the appliance details.
•
To restart the local appliance.
•
To shut down the appliance.
•
To perform a factory reset of the appliance.
•
To reset the appliance maintenance console password.
•
To launch a service console, which an authorized technical support representative can use to diagnose or repair a problem.
•
(Image Streamer) To configure the MGMT port for deployment network connectivity.
•
(Image Streamer) To configure the MGMT port for management network connectivity.
•
To log out of the appliance maintenance console.
NOTE: The commands displayed by the appliance maintenance console depend on the current state of the appliance and how
the appliance maintenance console was accessed.
Access the appliance maintenance console using a keyboard, video
monitor, and mouse
Prerequisites
Procedure
1. Connect a monitor cable to the monitor port and a USB cable to the USB port on either:
•
The front panel module on the front of the frame.
46
Troubleshooting