HPE Synergy 813562-001 Maintenance And Service Manual page 35

CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage
to the system board, do not touch the processor or the processor socket contacts.
2. Lower the load plate over the processor socket and place the load lever securely in its latch.
3. Apply thermal grease in a pattern of five large dots on the processor.
4. Position the heatsink over the processor and fasten the retaining screws in a diagonal fashion.
CAUTION: To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink
screws.
5. Slide the appliance module into the bay until it clicks into place.
For an Image Streamer, see " Guidelines for inserting an Image Streamer appliance."
If the appliance module is a member of a cluster, allow the appliance module to rejoin automatically the cluster. Rejoining
the cluster can take between 15 minutes to an hour. Do not remove the appliance module when it is rejoining the cluster.
Removal and replacement procedures
35