HPE Synergy 813562-001 Maintenance And Service Manual page 18

Procedure
1. Identify the version of the appliance module image.
(HPE Synergy Composer) View the firmware version on the Appliance panel of the HPE OneView Settings screen.
(HPE Synergy ImageStreamer) View the firmware version:
• In the appliance maintenance console using the View option.
• In HPE OneView, view the Installed firmware version for Member Appliance by using the OS Deployment Servers
screen.
a. Under General, select the link to the deployment server interface.
b. Select Deployment Appliances.
The firmware version that is displayed is the version of the image that you will download in step 5 and include on the USB
drive.
2. Insert the USB flash drive in the computer USB port.
3. If necessary, delete any unnecessary partitions to ensure adequate disk space.
4. Format the USB flash drive for one FAT32 or W95 FAT32 partition using the following guidelines:
• For a Linux operating system, use the /sbin/fdisk /dev/sdx command, where x represents the numerical
drive of the USB port used.
• For a Windows operating system, right-click the USB icon in the Computer window and select Format.
• Specify a label for your USB drive. It can be any name you want, except EMBEDDED, which is a reserved name. Consider
using the date as part of the label.
• Create only one primary partition. Delete any existing partitions.
• If prompted, specify the following parameters:
◦
Capacity: maximum value
◦ Allocation unit size: 4096 bytes
◦ First and last block: default values
5. Download the firmware image .zip file and the corresponding .md5 file from the Hewlett Packard Enterprise website
(http://www.hpe.com/downloads/Synergy).
The firmware image that you download must match the version determined in step 1. Make sure that you download the
complete image for recovery for the USB. The firmware update for existing images does not contain a complete image.
Use a checksum utility of your choice and the .md5 file to verify the integrity of the downloaded files.
6. Unzip the compressed image.
7. Copy the contents of the image file to the USB flash drive.
IMPORTANT: Do not rename the files.
8. Optionally, remove the USB flash drive and store it for future use.
Removal and replacement procedures
18