HPE Synergy 813562-001 Maintenance And Service Manual page 27

Cause
The appliance has no OS volumes.
Action
Contact your authorized support representative after creating a support dump from HPE OneView and Image Streamer
appliances.
Guidelines for inserting an Image Streamer appliance
• When an Image Streamer appliance is inserted, it takes up to 1 hour for the inserted appliance to be ready to operate in
high-availability mode. Do not remove the appliance until the insert operation is complete because it might interrupt
cluster formation. You can track the progress of the insert operation on the SERVERS > Enclosures screen in HPE
OneView user interface.
• After you insert an appliance, the SERVERS > Enclosures screen in the HPE OneView user interface displays an alert about
the interconnect link topology with state as Cleared. This state update might take up to 6 minutes from the time you
insert the appliance.
After you insert an appliance and cluster formation starts, a quorum configuration alert might appear on the Deployment
•
Appliances screen in the Image Streamer user interface. Ignore this alert because it is a part of the cluster formation
process. Once the cluster is formed, the alert automatically clears. If this alert stays active for more than 30 minutes,
contact your authorized support representative.
Removal and replacement procedures
27