HPE Synergy 813562-001 Maintenance And Service Manual page 32

On connection, the HPE Synergy Console is displayed.
b. Click the monitor icon at the top right of the screen.
c. Select the appliance module to monitor from the Appliances submenu.
A serial console window opens.
d. Press Enter.
4. Locate the Power/Reset LED indicator on the HPE Synergy appliance module front panel.
If there are multiple appliance modules, locate the indicator for the one to be reimaged.
5. Use the applicator to press the pinhole button (located inside of the Power/Reset LED indicator) for more than 10 seconds.
Figure 2: Button and Indicator panel
Item
1
2
3
Description
Pinhole button within Power/Reset indicator
Power/Reset LED indicator
Active LED indicator
Removal and replacement procedures
32