HPE Synergy 813562-001 Maintenance And Service Manual page 28

• The appliance insertion is complete when the Update Image Streamer activity completes successfully and the
Deployment Appliances screen displays information about two member appliances. Do not remove the inserted appliance
until this message is displayed.
• When the same appliance that was removed earlier is reinserted, the reinserted appliance undergoes a factory reset and
powers off. Then, you must click the Factory Reset link on the SERVERS > Enclosures screen in HPE OneView user
interface.
NOTE: If the CIM is in the local ring, then Factory Reset link in the alert will power on automatically. If the CIM is in the
remote ring, you must manually power on the CIM and then click the Factory Reset link.
You might encounter GEC errors during the process. Follow the recommendations provided in the alert until it is cleared. It
might require you to refresh the enclosure and reinsert the appliance a few times. Once the GEC errors are resolved,
appliance configuration and clustering take up to 1 hour to complete so that high availability is restored.
Removal and replacement procedures
28