Feed - QMS VMS Software Manual

If you specify /WRAP, you cannot specify /TRUNCATE. The /WRAP
qualifier forces /NOTRUNCATE.
If you specify both /NOWRAP and /NOTRUNCATE, the maximum
characters for the current font are printed on a line. This combination
of qualifiers is useful for some types of graphics output.
Note: LENGTH, MARGIN, TRUNCATE, PAGE_SETUP, WIDTH, and
»
WRAP qualifiers are ignored if the job is not declared as LN03 Plus or
HP PCL.
The PRINT command qualifier /FEED controls whether form feeds
are inserted into the print job when the printer reaches the bottom
margin of the form in use.
$ PRINT/NOFEED filename.ext
You can suppress this automatic form feed (without affecting any of
the other carriage control functions that are in place) by using the /
NOFEED qualifier. The /FEED and /NOFEED qualifiers do not affect
user-formatted files and can be used to override the installation-
defined defaults that are set for the output queue you are using.
This parameter is ignored if the job is not declared as either LN03
Plus, HP PCL, or Lineprinter.
After you create a set-up module, you must insert it into a library. The
default library is QMS$DEVCTL20.TLB. For example, the following
commands move the set-up module BORDER.PS into
QMS$DEVCTL20.TLB:
$ LIBRARY/INSERT/TEXT -
_$ SYS$LIBRARY:QMS$DEVCTL20.TLB BORDER
» Note: Do not remove any QMS modules from the
QMS$DEVCTL20.TLB library.