Table of Contents
Advertisement
4
The program next prompts you for the name of the save set:
* Enter the products to be processed from the
first distribution volume set.
* Products:
Type the product name from the distribution software tape label.
The name has the format QMSSMBPSE xxx where xxx is the ver-
sion of the software. For example, you would type
QMSSMBPSE031
if you're installing Version 3.0.
5
The next prompt asks for any options you want to use during
installation of the software:
* Enter installation options you wish to use [NONE]:
If you don't want to use any installation options, press Enter.
If you want to create a .LOG file on the host containing all
prompts from the installation, type L and press Enter.
Other options you can use are documented with the VMSINSTAL
program in your VMS manuals.
This message displays:
* The following products will be processed:
QMSSMBPSE V3.x
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-REMOVED, The product's release notes
have been successfully moved to SYS$HELP.
Refer to the Version 3.x Release Notes, located in the
SYS$HELP directory, for information on configuring the host soft-
ware for other/additional interfaces.
Advertisement
Table of Contents
