Table of Contents
Advertisement
3
The installation program prompts you for the name of the
device where you mounted the software tape:
* Where will the distribution volumes be
mounted:
Type the device name and press Enter.
4
The program next prompts you for the name of the save set:
* Enter the products to be processed from the
first distribution volume set.
* Products:
Type the product name from the distribution software tape label
and press Enter.
The name has the format QMSSMBPSE xxx where xxx is the ver-
sion of the software. For example, type QMSSMBPSE030 if
you're installing Version 3.0.
5
The next prompt asks for any installation options you want
to use during installation of the software:
* Enter installation options you wish to use
[NONE]:
n
If you don't want to use any options, press Enter.
n
If you want to create a .LOG file on the host containing all
prompts from the installation, type L and press Enter.
n
Other options you may use are documented with the VMSIN-
STAL program in your VMS manuals.
This message displays:
* The following products will be processed:
QMSSMBPSE V3.x
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-REMOVED, The product's release notes
have been successfully moved to SYS$HELP.
Advertisement
Table of Contents
