Table of Contents
Advertisement
9
You're now asked for a terminal port:
* Enter a terminal port for the QMS PS- product_name
printer:
This port is assigned to the product you're installing. The name
can have up to seven characters. Don't include the colon (:) after
the terminal port.
n
If the port is found, the following prompt displays:
* The port was found and the desired
characteristics have been set.
n
If the port was not found, the following prompt displays:
* The port does not exist or has already been
allocated to another user. Please enter
another port for the printer.
You're again prompted to enter the terminal port name.
10 You're now asked if the printer supports QMS Document
Option Commands.
Refer to your printer user's guide to determine if the printer sup-
ports DOC commands.
* Does this printer support Document Option
Commands (DOC)? [YES]:
Type Y or N.
11 If you answered Y, the following prompt displays:
* Will you be using the parallel interface?
[NO]:
n
Type N if this installation is for a serial terminal port.
n
Type Y if this installation is for a parallel terminal port.
»
Note: If you're using the parallel interface and are installing the
printer on a Dataproducts parallel interface, see your QMS printer
user's guide for support of Dataproducts parallel communication.
Advertisement
Table of Contents
