Table of Contents
Advertisement
The Def Job Prio option allows you to specific which jobs are printed
first, according to the interface through which they are received, when
jobs are received simultaneously. In other words, you can give jobs
received via the DECnet - TCP/IP interface priority over jobs received
via the parallel and serial interfaces, or vice versa. Valid choices
range from 001 to 099, with 001 meaning highest priority. The factory
default is 001.
There are currently two choices available to update the software.
If you're updating your host software from a previous version and you
want to save predefined set-up files, move them from the old device
control library QMS$DEVCTL20.TLB at this time. To do this, use the
following commands:
$ library/extract=module_name -
_$ SYS$LIBRARY:QMS$DEVCTL20.TLB -
_$ /OUT=module_name.tmp
A Device Control Library update utility has been provided in the
sys$common:[sysmgr] directory. To run this procedure, type
$ @sys$common:[sysexe]qms$update_lib
Note: This procedure provides a user-friendly method of copying
»
library modules from one Device Control Library to another. Additional
information is displayed when this procedure is run.
Advertisement
Table of Contents
