Table of Contents
Advertisement
Input Idle, DECnet print jobs are accepted only if the printer has com-
pleted the processing for the previous job and has begun to print it.
You can delete the current job from the internal print queue by using
the Cancel (or Reset) key on the printer control panel. Refer to your
printer user's guide for information on using the Cancel (or Reset) key.
If you have more than one QMS printer connected to the host, you
can merge execution queues in the event one printer experiences
problems. The following commands stop the queue associated with
the stalled printer (QMS_PUBS) and merge it with a different queue
(QMS_MKTG) associated with a similar printer:
$ STOP/QUEUE/REQUEUE=QMS_PUBS QMS_MKTG
$ ASSIGN/MERGE QMS_PUBS QMS_MKTG
Note: Not all parameters are supported on all printers. For the
»
/PARAMETER commands that are valid for your printer, see your
product-specific on-line help and characteristic file
(SYS$COMMON:[SYSEXE]QMS$product_CHAR.DAT).
If you use parameters in your generic queue definition, they override
any corresponding settings in the printer's configuration menu.
However, any of these parameters included with the PRINT com-
mand from the system prompt override the corresponding
parameters in the generic queue definition.
Note: These same commands may be supplied to the queue logical
»
(using DOCs) supplying the generic queue definitions.
Advertisement
Table of Contents
