Table of Contents
Advertisement
The following parameters are supported:
COLLATE
BOOK_STYLE
DATA_TYPE
DOC
INPUT
MESSAGES
OFFSET/JOGGING
ORIENTATION
OUTPUT
OVERLAY
PAGE_BORDER
The BOOK_STYLE parameter places two logical pages on each
sheet (or face) in an order that produces a booklet when the paper is
folded. The booklet can be read by turning pages from right to left or
flipped from bottom to top as if it were a notepad. Check your user's
guide to determine if your printer supports this parameter.
The COLLATE parameter may be used if your printer supports colla-
tion. This parameter may be specified as on or off. Use the following
command to select this option:
$ PRINT/QUE=quename/PARAMETERS=(COLLATE= selection ) -
_$ filename.ext
Note: The COLLATE parameter must be specified as on for STAPLE
»
to work. Stapling is defined for collation ranges. Turning collation off
prevents the symbiont from defining the required collation ranges.
PAGE_GRID
PAGE_LAYOUT
PAGE_LIMIT
PAGE_MARGIN
PAGE_OFFSET
PAGE_SCALING
SHEET_COUNT
PAGE_SCALINGSHEET_SIZE/PAGE_SIZE
SIDES
STAPLE
Advertisement
Table of Contents
