Table of Contents
Advertisement
This logical is associated with the execution queue and relays options
to the symbiont that modify its default behavior. These options include
"PARALLEL," "NODOC," "CARRIAGE," "SJS," and "INPUT."
n
PARALLEL
This option informs the symbiont that it's connected to a parallel
rather than a serial terminal port, thus preventing the symbiont
from sending backchannel information back to the port.
n
NODOC
This option prevents the serial/parallel-configured symbiont from
sending Document Option Commands (DOC) to the printer. This
option should be set when using a printer that doesn't support
DOC.
$ DEFINE/SYSTEM QMS$PS410_CONTROL -
_$ "NODOC,CARRIAGE"
n
CARRIAGE
This option causes the symbiont to append normal carriage con-
trol characters around device control library module records. By
default, the symbiont conforms to the DEC manner of not
prepending carriage-control.
$ DEFINE/SYSTEM QMS$PS410_CONTROL -
_$ "NODOC,CARRIAGE"
n
SJS=SES or SJS=EDO
When SJS=SES is specified, the symbiont is forced to use the
DOC %%Session for subjob delineation.
When SJS=ED0 is specified, the symbiont is forced to use
<ESC><DEL>0<CTRL-D> sub-job delineation.
By default the symbiont will use the <ESC><DEL>0<CTRL-D>
method unless the printer supports the %%Session method for
subjob separation. In either case, this option permits a subjob
separation method override capability.
Advertisement
Table of Contents
