Table of Contents
Advertisement
If a generic queue includes this parameter and a print job sent to the
queue doesn't specify an output tray or bin with the PRINT command,
the printer sends the printed page to the top output tray or bin when
printing the job.
If a generic queue doesn't specify this parameter, you may include
OUTPUT at the command line as follows:
$ PRINT/PARAMETERS=(OUTPUT= selection )
The OVERLAY parameter enables you to print an image as a back-
ground of your job. See your Document Option Commands manual
for more information about this parameter.
The PAGE_BORDER parameter enables you to print a border around
the page margins of each logical page. See your QMS Document
Option Commands manual for more information about this parameter.
The PAGE_GRID parameter allows multiple pages to be printed on a
single sheet of paper. (This is also called N-UP or Number-Up print-
ing.) The PAGE_GRID parameter determines the number of page
spots per sheet and the order in which logical pages are placed within
the spots. See your QMS Document Option Commands manual for
more information about this parameter.
The PAGE_LAYOUT parameter allows you to selectively reset individ-
ual formatting commands in subsequent subjobs. Valid values are off
and on. The default value is off. Check your printer user's guide to
determine if your printer supports this parameter.
The PAGE_LIMIT parameter provides a means of specifying a range
of pages to be printed. The range indicates the first and last pages
that are to be printed. Pages that come before the page identified as
Advertisement
Table of Contents
