Table of Contents
Advertisement
The DECnet interface option shares its configuration menu on the
printer control panel with the TCP/IP interface option. Before begin-
ning the software installation, use the following instructions to config-
ure the DECnet-specific interface options (Administration/Emulations/
DECnet-TCP/IP menu). See your printer user's guide for instructions
on how to use the printer control panel.
DECnet-Specific Configuration Options
n
Mode
n
Emulation
n
Min K Spool
n
Spooling
n
DECnet Address
n
DECnet HSL
n
Packet Size
n
Multicast Pkts.
n
PS Protocol
n
Def Job Prio
The default setting for the DECnet-TCP/IP interface Mode option is
Enabled (that is, the interface is ready to communicate with the host).
If you must disable the interface at any time, use the Mode option in
the DECnet-TCP/IP menu. See "Disabling a Printer Interface" in
chapter 6, "Troubleshooting."
Advertisement
Table of Contents
