Table of Contents
Advertisement
PS Executive is installed as part of the host software installation.
Once the software is installed, PS Executive can be started with the
following command:
$ run sys$system:qms$psexec
You're asked for the printer node name:
* What is the QMS printer node name
Enter the node name for the printer whose settings you want to view.
This node name was assigned to the printer by the system adminis-
trator during the host software installation.
You may view the settings on only one QMS printer at a time. How-
ever, up to four users may view the same printer at the same time. If
you have other printers connected to the host, you must exit PS Exec-
utive before viewing others.
Your system administrator established various printer default settings
at installation. These default settings are stored in printer memory
and become effective whenever the printer is turned on. Since these
settings affect the way the printer receives, processes, and prints your
files, the settings are important to you. With PS Executive, you can
look at these settings without leaving your desk.
After starting PS Executive, press Return to display the title screen.
See your Remote Console User's Guide for further instructions.
Advertisement
Table of Contents
