MINOLTA-QMS PagePro 4100E User Manual page 95

6-2 Host-based lpd Configuration
Note
• For <printer serve name> must be the same as the one recorded in
. Optional arguments inserted between the
etc/hosts
before the trailing
. For details, see the System 5 Release 4 System Administration
${files}
Manual.
7. Save the file and quit the editor.
8. You need to use lpadmin to configure the host printer. Type the fol-
lowing:
lpadmin -p <printer name> -v /dev/null -i
/usr/nic/port1_interface
Note
• configures the printer name and associates it with a given
lpadmin
device and printer interface program. There is no
involved with this method of configuration.
9. Next, initialize the printer. Type the following commands:
accept <printer name>
enable <printer name>
Note
• After each entry lpadmin acknowledges the invoked command.
10. Next, type the following command:
lp -d <printer name> /etc/hosts
11. Check for output or type the following:
lpstat <printer name>
Or:
lpstat -t
6-20
0 are ${banner} , ${user_name}
entry and
10001
, ${request_ID}
/etc/printcap
Enter
Enter
Enter
/
, and
file