MINOLTA-QMS PagePro 4100E User Manual page 45

3-3 Windows 2000
7. On the
Add Port
into the
Printer Name or IP Address
If the network you are on uses DNS (Domain Name Services),
type in the DNS name instead of the IP address.
8. Type the name of the port you want into the
then click
Next
Note
• When you type the IP address
box
Address , the name of the port is automatically entered in
Port Name box as IP_ <IP address> , but you can change the port
name as you want.
9. On the Additional Port Information Required
, and then click
tom
10. On the
Configure Standard TCP/IP Port Monitor
select from the
LPR
11. Type the name of the queue you want into the
and then check the
12. Click to return to the
OK
page.
13. Click Next to display the next wizard page, and then click
14. Click the
Close
click the
Apply
15. Display the General
16. If the test prints normally, complete the procedure by clicking
to close the Properties
After you finish installing a printer with the above procedure, you can
use it just as you would any standard local printer. The printer can also
be used as a network printer by other Windows computers on your
network whose Windows 2000 systems are configured the same way as
described above.
3-12
page, type the IP address of the Network Card
.
into the
.
Settings
LPR Settings
LPR Byte Counting Enabled
Additional Port Information Required
button of the
Printer Ports
button of the
Properties
tab, and then print a test page.
dialog box.
box.
Port Name
Printer Name or IP
page, select
dialog box,
box.
Queue Name
check box.
dialog box, and then
dialog box.
box, and
the
Cus-
box,
Finish .
OK