MINOLTA-QMS PagePro 4100E User Manual page 104

Before you can use TCP/IP for network printing, you must first assign
the following IP parameters to the Network Card: IP address, subnet
mask, default gateway.
You can use any of the following methods for assigning IP parameters
to the Network Card.
Bundled Utility Programs
• Management Access Program (MAP) (Windows) or a Web
browser
See 8-1 Management Access Program (Windows) and 9-4-1 TCP/
IP Configuration.
Note that your computer must have IPX/SPX conversion protocol
installed in able to use MAP.
• BOOTP (Windows)
See 8-3 BOOTP (Windows).
Other Methods
• ARP command (Windows)
See 7-1 Assigning IP Addresses Using ARP (For Windows).
• ARP command (UNIX)
See 7-2 Assigning IP Addresses Using ARP (For UNIX).
• BOOTP daemon (UNIX)
See 7-3 Assigning IP Addresses Using the BOOTP Daemon (For
UNIX).
• RARP daemon (UNIX)
See 7-4 Assigning IP Addresses Using the RARP Daemon (For
UNIX).
• DHCP server
See 9-4-1 TCP/IP Configuration.
7-1