Led Status Indicators - MINOLTA-QMS PagePro 4100E User Manual

This chapter explains the Network Card's LED status indicators and
tells you what to do when experiencing problems with the Network
Card. If the information presented here does not solve your problem,
contact your nearest Support Center or Technical Service
Representative.

11-1 LED Status Indicators

The Network Card has two LED status indicators amber and green in
color.
The amber LED shows the progress of normal print jobs. It flashes
while the Network Card is sending or receiving data, and goes out
when there is no data send or receive operation in progress.
The green LED shows normal Network Card operation, as described in
the table below.
LED Operation
Green LED lit
Green LED flashes
3 times, then
remains lit
Green LED flashes
quickly
Green LED flashes
4 times, then
pauses
11-1 LED Status Indicators
Printer Status Network Card Status
Power on Self-test in
progress
Print job Normal operation
standby
Self-test Prints status page
finished
Self-test in RAM abnormality
progress detected
Self-test in Ethernet hardware
progress self-test failed.
Check your
network.
Normal/
Abnormal
Normal
Normal
Normal
Abnor-
mal
Abnor-
mal
11-1