MINOLTA-QMS PagePro 4100E User Manual page 186

8. Are there sufficient user positions on the file server?
The print server logs on as a user.
9. Is bindery context set up on the file server?
With some versions of NetWare, you must set up the bindery con-
text on the file server even when you are using the NDS Mode.
10. Is the network loaded on the client computer?
See the NetWare documentation for more information.
11. Are client application settings correct?
For example, check to make sure that the correct client driver is
being used.
12. Is the computer connected correctly to the print queue?
Print a file and confirm that the job is sent to the print queue. If the
job is sent correctly, check for a problem in the connection
between the computer and print server.
13. Does a sample print job sent directly from
assigned queue become active?
14. Are you using the correct version of
Network Card configuration is impossible with
sion 1.0.
15. Is AUTO ENDCAP
Data can be sent to the network using
to check if
PRINTCON
abled, enable it.
PCONSOLE
enabled?
AUTO ENDCAP
11-2 Troubleshooting
PCONSOLE to the
?
PCONSOLE
. Use
AUTO ENDCAP
is enabled. If it is dis-
Ver-
11-5