MINOLTA-QMS PagePro 4100E User Manual page 41

3-2 Windows NT
5. Display the
Ports
6. Click
Add Port
This displays a list of enabled port types.
7. Select LPR Port
8. On the
Add LPR compatible printer
address of the Network Card into the
providing lpd
If the network you are on uses DNS (Domain Name Services),
type in the DNS name instead of the IP address.
9. Type the name of the port you want into the
print queue on that server
dialog box.
10. Click the
Close
click the button of the
OK
11. Right-click the printer icon again to display its
box, display the
12. If the test prints normally, complete the procedure by clicking
to close the
Properties
After you finish installing a printer with the above procedure, you can
use it just as you would any standard local printer. The printer can also
be used as a network printer by other Windows computers on your
network whose Windows NT 4.0 systems are configured the same way
as described above.
3-8
tab.
.
and then click New Port
box.
box, and then click
button of the
Printer Ports
Properties
tab, and then print a test page.
General
dialog box.
.
dialog box, type the IP
Name or address of server
Name of printer or
to close the
OK
dialog box, and then
dialog box to close it.
Properties dialog
OK