MINOLTA-QMS PagePro 4100E User Manual page 159

9-4 Network Card Settings
To use WINS with your Network Card, configure the following items.
NetBIOS Name
The NetBIOS name for the Network Card is shown on this screen.
The default NetBIOS name is the Network Card's serial number
(for example, ML1_995243), unless you previously configured a
name for the Network Card with DHCP.
You may change the NetBIOS name here, by entering a new name.
The name can be up to 15 characters long.
Primary WINS Server
If you previously configured a DHCP server to provide the Net-
work Card with the IP address of the primary WINS server, this
item shows the address. Otherwise, enter the IP address of the pri-
mary NetBIOS name server here.
Secondary WINS Server
You may also enter the IP address of a secondary NetBIOS name
server, if you want. If you configured your DHCP server to pro-
vide the address of a secondary WINS server to the Network Card,
the address fields automatically are filled in with the appropriate
information.
After you configure the NetBIOS (WINS) settings, restart the printer.
The Network Card's status page should now show that the Network
Card is successfully registered with the WINS server. The check boxes
labeled Primary Server Logged in
on the TCP/IP Configuration Menu now indicate which WINS
server(s) the Network Card is registered with.
Under normal circumstances, your Network Card automatically renews
its registration with the WINS server before its lease expires.
9-14
and Secondary Server Logged in