9-4 Network Card Settings
Print Server Password
When you want to use a password for logging into the Network
Card, type the password you want to specify into the field. Type
the same password into the
tion. The password you specify must be the same as the bindery
and NDS-based print server password.
Preferred File Server
Type in the name of the preferred file server when setting up for
bindery and bindery emulation. See 4-1-9 Preferred File Server
for more information about the preferred file server.
The print server must always be configured on a preferred file
server. Failure to properly configure the preferred file server can
cause incorrect printing results.
Preferred NDS Context
Input the print server for NDS operation. In this case, always input
the entire context, without inputting a period at the beginning of
the path.
Example: ou=standard.ou=organization_1
Preferred NDS Tree
Input the print server for NDS operation.
If you do not know what the tree is, input
command line.
Print Queue Scan Rate
Specify the print server's queue scan interval in seconds. The
default scan rate is 1 second.
9-16
Password Retype
whoami
field for confirma-
at the DOS