In addition to the MAP and Web browser combination for making
settings, this Network Card also supports use of Telnet for setting up
the environment. Network Card settings can be make from a Telnet
client platform.
The following settings can be made over a Telnet platform.
•
IP parameter changes
•
LPD settings
•
Protocol changes
•
Unit reset
•
Factory setting restore
•
Password changes
Note
• The Network Card must be assigned a valid IP address before you can
use a Telnet connection to make settings. Also, the computer you are
using for the Telnet connection must have TCP/IP enabled, and must be
able to operate as a Telnet client. See Chapter 7 - Setting Up IP Param-
eters for more information about assigning IP parameters to the Net-
work Card.
10-1