MINOLTA-QMS PagePro 4100E User Manual page 119

8-1 Management Access Program (Windows)
Note
• The maximum number of hops value defines the maximum number of
subnetworks the program searches for Network Cards. When a value of
zero is set here, the search does not include any subnetworks to which
the computer is connected. A value of 2 searches all networks that can
be accessed through no more than two routers. Specifying a value of 15
or greater automatically detects all connected Network Cards, but such
a high setting greatly increases traffic, and so it is not recommended.
After the settings are the way you want, click
close the dialog box.
Running MAP
1. On the menu, point to
Start
2. On the submenu that appears, click
3. A list of Network Cards found by MAP appears on a Web browser
page.
4. Click the URL or the serial number of the Network Card whose
settings you want to change.
5. This displays a Web page for managing the printer where the Net-
work Card is installed. You can use the Web page to make various
Network Card settings. See Chapter 9 - Using a Web Browser to
Make Settings for more information.
8-4
to apply them and
OK
and then
Programs
.
MAP
.
Map