AJAX MotionProtect Plus Fibra User Manual page 3

MotionProtect Plus Fibra is a wired motion detector with an additional
microwave sensor. Using the IR sensor, it can identify intrusions by detecting
moving objects with temperatures close to that of the human body.
When MotionProtect Plus Fibra detects motion, it conducts an additional RF
scan of the room to eliminate false alarms due to thermal interference: air ows,
heated curtains and blinds, fans, replaces, air conditioners, and other likely
sources of false alarms.
When an armed detector identi es motion, it instantly sends an alarm to the
hub, which activates the sirens connected to the system, triggers
noti es users and the security company. All MotionProtect Plus Fibra alerts and
events are recorded in the noti cation feed of the Ajax app.
Users know exactly where motion is detected. The noti cations contain the
name of the hub (name of the guarded object), the name of the device, and the
virtual room to which the detector is assigned.
How Ajax noti es users of alerts
More about Ajax motion detectors
The detector doesn't go into armed mode instantly. The time it takes to switch to armed
mode depends on two factors: exit delays (speci ed in the detector settings) and the
hub – detector ping interval (Fibra settings, the default value is 36 seconds).In the rst
case, the delay is set by a user or a PRO with administrator rights. In the second case,
the delay occurs because it takes one ping interval for the hub to notify the detector
about the transition to armed mode.
scenarios , and