Kohler SV810-840 Service Manual page 88

Section 7
Electrical System and Components
Starter Service
52 357 02-S
other starter parts for wear or damage as required.
Starter Reassembly
52 357 02-S
pliers to compress it in the groove.
c. Slide the stop collar up and lock it into place,
so the recess surrounds the retainer in the
outward on the armature splines against
the retainer to help seat the collar around the
retainer.
Figure 7-55. Installing Stop Collar and Retainer.
7.32
Figure 7-56. Installing Thrust Washer.
drive end cap, and install the armature with the
drive pinion.
52 357 02-S
pinion.
at the same time seat the drive lever into the
housing.
machined surface of the housing which
Figure 7-57. Installing Armature and Pivot Lever.