Kohler SV810-840 Service Manual page 69

#
run.
24 584 36-S
(2-1/16 in. High)
2 1
4
3
Ignition Module Resistance Table
room temperature.
reinstall the second mounting screw removed
follows.
module position.
screws to hold it temporarily.
centered under the module.
the module. The ignition module air gap is
critical to proper system performance. Do not
Test
24 584 36-S
(Use
(2-1/16 in.
Digital
High)
Ohmmeter)
From No. 590 to
1 to 4 616 ohms
Electrical System and Components
magnet to pull the module down against
the feeler gauge, and retighten the mounting
screws.
gap, minimum of 0.28 mm (0.011 in.), exists
under each leg of the module.
torque the module mounting screws to
set the other ignition module.
connections do not feel snug, disconnect the lead,
lightly pinch the female terminal with a pliers,
Section 7
7
7.13