Kohler SV810-840 Service Manual page 47

Figure 5-31. Choke Shaft and Spring Details.
inner leg of the spring, against the formed stop
within the choke lever as originally assembled.
spring must still be between the formed stops of
11. Place a drop of the Loctite
The larger cutout must be on the right. Close
the choke and check the plate alignment within
the carburetor throat, then tighten the screws
securely.
12. Check for proper operation and free movement of
the parts. Install the new cap.
Always use new gaskets when servicing or
reinstalling carburetors. Repair kits are available
which include new gaskets and other components.
Carburetor Repair Kit
Float Kit
Solenoid Assembly Kit
Choke Repair Kit
®
on the threads of each
Fuel System and Governor
Nikki Carburetors
Float Replacement
If symptoms described in the carburetor
and inlet needle or valve.
1. Remove the air cleaner and air intake
components from the carburetor as described in
Section 4.
2. Disconnect the fuel inlet line from the carburetor.
carburetor.
4. Disconnect lead wires from fuel solenoid-
equipped carburetor.
Remove the fuel bowl retaining screw or fuel
container. Remove the bowl from the carburetor
body.
16.5 mm
(0.65 in.)
Turn Carburetor
Upside Down
Figure 5-32. Proper Float Level.
wrong.
Section 5
5
5.15