Kohler SV810-840 Service Manual page 45

Figure 5-23. Checking Float Height.
bowl and transfer passage (if so equipped). See
Figure 5-24. Installing Fuel Bowl O-Rings.
with the four original screws. Torque the screws
to 2.5 ± 0.3 N·m (23 ± 2.6 in. lb.)
Figure 5-25. Installing Fuel Bowl.
Fuel System and Governor
carburetor. Secure with the two large-head screws
a fuel solenoid), to the original screw location.
Torque the top cover screws to
2.5 ± 0.3 N·m (23 ± 2.6 in. lb.).
17. Place the longer new spring onto the idle fuel
Figure 5-26. Installing Idle Fuel Adjusting Screw
and Spring.
18. Place the shorter new spring onto the idle speed
Figure 5-27. Installing Idle Speed Adjusting Screw
and Spring.
Section 5
5
5.13