Table of Contents
Advertisement
3. Use three PM4 × 10 screws to fix the gang box onto
the wall mount.
4. Repeat the step 4 to 7 of 2.4.1 Ceiling Mounting
Without Junction Box to finish the installation.
3 Menu Description
Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
Steps:
1. Connect the camera with the TVI DVR and the
monitor, as shown in figure 3-1.
2. Power on the camera, TVI DVR, and monitor to view
the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
preset No. 95.
Figure 2-49 Fix the Wall Mount
Figure 2-50 Fix the Gang Box
Figure 2-51 Finish the Installation
Figure 3-1 Connection
button or calling
Advertisement
Table of Contents
