Table of Contents
Advertisement
Figure 2-13 Fix the Installation Plate
For Type IV camera:
i. Refer to Step 3 of Section 2.2.1 to dissemble the
camera
ii. Use M4 × 10 screws to fix the base onto the wall
mount.
4. Refer to Steps 3 to 5 of Section 2.2.1 to finish
installation.
3 Menu Description
Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
Steps:
1. Connect the camera with the TVI DVR and the
monitor, as shown in figure 3-1.
Camera
2. Power on the camera, TVI DVR, and monitor to view
the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
calling preset No. 95.
Figure 2-14 Fix the Base
Figure 2-15 Finish Installation
Figure 3-1 Connection
TVI DVR
button or
Monitor
Advertisement
Table of Contents
