Table of Contents
Advertisement
2.4.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
Drill Φ 10 mm screw holes in the wall where you want
1.
to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Loosen the set screw.
4. Rotate the camera to align the triangle mark with the
screw hole, and disassemble the camera.
5. Use M4 × 10 screws to fix the base onto the wall
mount.
Figure 2-36 Fix the Base onto the Wall Mount
6. Repeat steps 6 to 9 of 2.4.1 Ceiling Mounting Without
Junction Box to finish the installation.
Figure 2-33 Finish the Installation
Figure 2-34 Fix the Wall Mount
Figure 2-35 Dissemble the Camera
Advertisement
Table of Contents
