HIKVISION DS-2CE12DF0T-FS User Manual page 20

Pan Position
[0° to 360°]
1). Rotate the enclosure to adjust the pan position [0°
to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.5.2 Ceiling Mounting with Junction Box/Inclined
Ceiling Mount
Before you start:
You need to purchase a junction box or inclined ceiling

mount in advance.
Ceiling mounting with junction box and inclined ceiling

mount are similar. Following steps take junction box as
an example.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Install the gang box to the junction box cover with
three PM4 screws.
Figure 2-44 Install Gang Box to Junction Box Cover
6. Fit the camera onto the gang box.
Tilt Position
[0° to 75°]
Figure 2-42 3-Axis Adjustment
Figure 2-43 Drill Template
Rotation Position
[0° to 360°]