Installation - HIKVISION DS-2CE12DF0T-FS User Manual

1.2.5 Overview of Type V Camera
Main
Body
Enclosure
Gang Box
Figure 1-5 Overview of Type V Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with your

power output to avoid damage.
Make sure the wall is strong enough to withstand three

times the weight of the camera and the mount.
If the product does not function properly, contact your

dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting Without Junction Box
Before you start:
Ceiling mounting and wall mounting are similar. Following
steps take ceiling mounting as an example.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Cable
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Align the screw holes in the bracket to the ceiling, and
secure the camera with three PA4 × 25 screws
(supplied).
Base
Hole
Figure 2-1 Drill Template
Microphone
Screw Hole
Screw Hole
templat e
Switch Button
Power Cord
Video Cable
Screw Hole