Table of Contents
Advertisement
2.5
Installation of Type V Camera
2.5.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
3. Attach the gang box to the ceiling and secure it with
three PA4 × 25 screws (supplied).
Figure 2-39 Attach the Gang Box to the Ceiling
4. Fit the camera onto the gang box.
5. Turn the camera clockwise until it snaps into the gang
box.
Figure 2-41 Snap the Camera into the Gang Box
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below.
Figure 2-37 Finish the Installation
Figure 2-38 Drill Template
Figure 2-40 Fit the Camera
Advertisement
Table of Contents
