Table of Contents
Advertisement
6. Route the cables through the cable hole, or the side
opening of the junction box.
7. Combine the junction box cover with its body with
supplied screws on the junction box's cover.
Figure 2-12 Combine the Junction Box's Cover with its
8. Repeat the step 5 and 6 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
3 Menu Description
Purpose:
Call the menu by clicking button
or call preset No.95.
Camera
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
preset No. 95.
5. Click the direction arrow to control the camera.
(1) Click up/down direction button to select the
item.
(2) Click Iris + to confirm the selection.
(3) Click left/right direction button to adjust the
value of the selected item.
Body
TVI DVR
Figure 3-1 Connection
on the PTZ interface,
button, or call
Monitor
Advertisement
Table of Contents
