ROTISSERIE (OPTIONAL)
Alignment
Rotisserie
Collar with
Rod
Rotisserie
screw
Rotisserie
Prongs
Handle
Motor
Rod
Counter
Counter
weight
weight
Rotisserie
washers
Bracket
Assembling the Rotisserie Rod with Prongs
Slide the prongs into the rotisserie rod. Slide in the alignment collar with screw on the threaded end, use the round nut, counter weight,
nut and then rotisserie handle in this order.
Attaching the Rotisserie Bracket onto the BBQ grill:
Open the BBQ hood. Use two screws provided with the rotisserie bracket in the mounting holes provided in the side panel of the grill
body.
Slide the Rotisserie motor on to the bracket and place the rotisserie rod assembly locating in the square bush in the motor as above.
49
546001.A.6 - July 17, 2019