Rotisserie Assembly Instructions - Masport LIFESTYLE 3 Owner's Manual

Rotisserie Assembly Instructions

Tools needed for assembly
Crosshead screwdriver, 10mm A/F spanner.
Rotisserie Components
Rotisserie Motor
Alignment Collar
Prongs
Rotisserie
Bracket
Assembling the Rotisserie Rod with Prongs
Slide the prongs into the rotisserie rod. Slide in the alignment collar with screw on the threaded end, use the round nut, counter weight, nut
and then rotisserie handle in this order. Slide the alignment collar without screw on the spike end of the rotisserie rod.
18
Rotisserie Rod
Counter weight
Rotisserie Rod Handle
washers
Alignment Collar
Counter weight
with screw
Attaching the Rotisserie Bracket onto the BBQ grill:
1. Open the BBQ hood. Use two screws provided with the rotisserie bracket in the mounting holes provided in the side panel of the grill
body.
2. Using the one eye hole and other half circle notch attach the rotisserie bracket to the side panel of the grill body.
Attaching the Rotisserie Motor and Rotisserie Rod onto the BBQ Grill:
Slide the Rotisserie motor on to the bracket and place the rotisserie rod assembly locating in the square bush in the motor. Keep the sleeve
in the side panel notch to give the minimum friction while rotating.
While using the rotisserie, adjust the counter weight to your requirement.
19