Front Windshield Defrosting Key; Internal / External Circulation Mode Key - MG Hector Owner's Manual

The internet car
Hide thumbs Also See for Hector:
Table of Contents

Advertisement

Front Windshield Defrosting Key

Press the button to select the front windshield
defroster mode.
Press the front windshield defroster button
and the air volume ascends to Range 6
automatically. If the air volume is already
higher than 6 before the button is pressed, it
will remain at same speed.
As you switch from the air blow mode to the
defroster mode, the indicator below the button
illuminates. As you turn on A/C function, the
indicator on the A/C button illuminates.
The air circulation mode switches to external
circulation. Press the button again to turn off
the front defroster mode and the system
restore to the state before defrosting.

Internal / External Circulation Mode Key

You can press this button during driving on a
dusty road, or when you want to prevent the
exhaust or outside smoke entering inside, or
when you want to quickly decrease or
increase temperature in the passenger area.
The internal circulation icon displays in white,
and the interior air is circulated internally.
Press this key to switch to the external
circulation mode. The external circulation
icon displays in white, and the internal
circulation icon displays in grey. The air is
circulated externally.
The system memorizes the previously set air
circulation mode the next time you start the
vehicle.
Caution
You may feel tyred and sleepy after long-
time driving in the internal circulation
mode.
Please switch to external circulation
mode on a regular basis to acquire fresh
air.
HVAC
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hector plus

Table of Contents