Table of Contents
Advertisement
INSTRUMENTS AND CONTROLS
Headlamp High Beam Indicator
The high beam indicator illuminates when the
headlamp high beam is turned on.
86
Position Lamp Indicator
This indicator illuminates when the position
lamp is turned on.
Engine Malfunction Indicator Lamp (MIL)
This indicator lamp illuminates when the
ignition switch is turned on but the engine has
not started. This indicates that the indicator
lamp bulb can work normally. The lamp goes
out after the engine is started. This
malfunction indicator lamp (MIL) illuminates
upon occurrence of any component or
subsystem fault related to the emission
system. Once the electronic control module
(ECM) detects any fault, the malfunction
indicator lamp will keep illuminated. In case
that serious misfire is detected, the
malfunction indicator lamp will flash
constantly. Serious misfire can cause damage
to the catalytic converter. In case of this, the
electronic system of the vehicle will switch to
Advertisement
Table of Contents
