Internal Tread Wear Indicator - MG Hector Owner's Manual

Do not touch the curb when parking.
Regular Tyre Check
Ÿ Appearance damage.
Ÿ Foreign material.
Piercing.
Ÿ
Ÿ Cut.
Crack.
Ÿ
Ÿ Protruding on side wall.
It shall also inspect the wheel for damage.
Tyre defects including the above defects may
lead to vehicle out of control, causing personal
injury.
In case of damage or abnormal wear of tyre or
wheel, please consult the MG Authorised
Service Center for help.
The vehicle is equipped with radial tyres. MG
Motor suggests replacing with radial tyres of
the same size, pattern, tread wear,
temperature and rated speed.
Note
The use of tyres with different size than
the original tyres may cause the tyre and
the vehicle component to interfere with
each other, thus causing damage to the
tyre and vehicle.
Caution
If the vehicle is equipped with tyre
pressure monitoring system, the tyre
repairing liquid for tyre repair may result
in the failure of the tyre pressure
monitoring system sensor.
suggested to go the MG Authorised
Service Center for inquiries and repair.

Internal Tread Wear Indicator

Check the tyre tread depth as per the tread
wear indicator regularly. The mark on the tyre
wall indicates the position of the tread wear
indicator.
VEHICLE SERVICE & MAINTENANCE
The tyre must be replaced when the tread
wear indicator appears.
depth is equal to or less than 1.6 mm due to
wear, the tread wear indicator will appear
between the tread grooves.
It is
Caution
Do not drive the vehicle in case of tyre
wear or damage. The worn or damaged
tyres may lead to the vehicle out of
control and cause collision accidents,
resulting in personal injury and damage
of vehicle or other properties.
When the tread
185