MG Hector Owner's Manual page 78

INSTRUMENTS AND CONTROLS
Instrument Cluster Display Brightness
Adjustment
Type - I Instrument Cluster*
Turn the adjustment lever to set the desired
display brightness. After adjustment, if no
operation is conducted within 2s, the system
will turn back to the previous interface.
76
Type - II Instrument Cluster*
For high-configuration models, a backlight
brightness adjustment button is set at the left
side of the instrument panel.
Turn the ignition switch to ON position and
then press the backlight adjustment button to
set backlight brightness of the instrument
cluster.
As it is shown in the figure, the current
backlight brightness will be shown on the LCD
as you make the adjustment. If no operation is
conducted within several seconds, the system
will save the setup and turn back to the
previous interface. When the position lamp is
switched on, the backlight brightness will
decrease automatically.