Driver Fasten-Seat-Belt Warning Lamp; Front Passenger Fasten-Seat-Belt Warning Lamp; Fuel Level Too Low Warning Lamp - MG Hector Owner's Manual

Driver Fasten-Seat-Belt Warning Lamp

The seat belt warning lamp illuminates if the
driver does not fasten the seat belt properly
after the ignition switch is turned on.
Following this, the following circumstances
will appear unless the driver fastens the seat
belt properly:
The seat belt warning lamp keeps
Ÿ
illuminated
If the vehicle speed exceeds 20 km/h, the
Ÿ
warning lamp will flash and the warning
buzzer will buzz for a certain time.
Front Passenger Fasten-Seat-Belt
Warning Lamp*
The seat belt warning lamp illuminates if the
front passenger seat is occupied but the
occupant does not fasten the seat belt
properly after the ignition switch is turned on.
Following this, the following circumstances
will appear unless the front passenger fastens
the seat belt properly:
Ÿ The seat belt warning lamp keeps
illuminated
Ÿ If the vehicle speed exceeds 20 km/h, the
warning lamp will flash and the warning
buzzer will buzz for a certain time.
This warning lamp does not illuminate if the
front passenger seat is not occupied after the
ignition switch is turned on.
INSTRUMENTS AND CONTROLS

Fuel Level Too Low Warning Lamp

This warning lamp will illuminate immediately
the ignition switch is turned on. It indicates
that the system is conducting self-inspection
and the warning lamp bulb can work normally.
If this lamp keeps illuminated after the ignition
switch is turned on or it illuminates during
driving, it indicates that the fuel amount in the
fuel tank is insufficient and you should
replenish the fuel in time.
Note
Do not exhaust the fuel, otherwise the
catalytic converter can be damaged.
91