Automatic Headlamp And Windshield Wiping - MG HECTOR Quick Start Manual

VEHICLE OPERATION
7 - AUTOMATIC HEADLAMP / WINDSHIELD WIPING*
Your vehicle is fitted with light and rain sensors and operates headlamp and wipers automatically.
The location of sensor is on the front windshield. It provides sensing signals for bad/good lighting & amount of water
vapour/rainfall on the surface of the glass.
Clean the glass on time so that the stains, snow and ice does not affect the sensor's performance.
Automatic Headlamp ON/OFF
When the ignition switch is in ON position, turn the combination
switch lever to AUTO position. This activates automatic headlamp
ON/OFF function. The system's light sensor recognizes the
environmental light conditions.
Automatic Wiper ON/OFF
When the ignition switch is in ON position, turn the windshield
wiper/washer control lever to AUTO Position.
The intermittent and automatic wiping speed is adjustable. To select
the desired speed, just turn the circular knob in the middle of the
control lever.
Do not start the wiper when the windshield surface is dry. Flush with water thoroughly.
"*" indicates that the equipment mentioned is optional and your vehicle may not have such equipment.
Please refer to the actual vehicle for vehicle configuration. MG Motor India Pvt. Ltd. reserves the copyright of the Manual.
09