Jumper Settings and Connectors
3.4.10 J15 - FLOPPY DRIVE CONTROLLER
J15 is on the right hand side of PCI Slot 1, please refer to Fig. 3a for its
location. This Floppy drive controller also supports 2.88M FDD format.
3.4.11 J16 - PARALLEL PORT
J16 is on the right hand side of PCI Slot 1, please refer to Fig. 3a for its
location. Pin 1 is on the up left hand side.
3.4.12 J17 - PRIMARY IDE CONNECTOR
The bootable Hard Disk must connect to this Primary IDE Connector. J17
locates right to J15, please refer to Fig. 3a for its location.
3.4.13 J18 - SECONDARY IDE CONNECTOR
J18 locates right to J17, the primary IDE connector. Please refer to Fig.
3a for its location.
3.4.14 J19 - SERIAL PORT 1 (COMA)
Both COMA and B are 16550 fast UART compatible. J19 is located in
between the PCI Slot and the SIMM socket, please refer to Fig. 3a for its
location. Pin 1 is on the up left hand side.
27