Setting The Default Wave File Playlist - DTK PAM-0050S User Manual

70
There are two ways to remove files from the Playlist box:
• Highlight the file and click Remove.
• Double-click the file.
Click Clear if you want to remove all files from the Playlist box.
To change the order in which the files appear, you can click and drag a file,
dropping it into its new position. There are times when you might not
remember how a file sounds from its name. Select the file and click
Preview to hear what it sounds like. The file currently being previewed is
displayed directly beneath the Preview button.
When you are done choosing which files are to be in your playlist and
determining the order in which they appear, click Save. If you want to give
your playlist a new name, click Save As to open the Save As dialog box.
Enter a name and directory to save the playlist file under and click Save.

4.4.6.11 SETTING THE DEFAULT WAVE FILE PLAYLIST

When you have created a wave file playlist that you like, you may want to
have that playlist file loaded automatically every time you start the
AudioRack32. The Used as Default List check box in the Set Playlist
dialog box fulfills this function. The Used as Default check box is selected
automatically when you call up the Set Playlist dialog box. The default
playlist file is chosen when you click OK to exit the Set Playlist dialog box
with the following two conditions:
1. The Used as Default List check box is selected.
2. The current playlist is a previously saved playlist file.
If the Used as Default List check box is not selected when you click OK,
there will be no default playlist file. Nothing will be loaded into the Digital
Audio Player when you next start the AudioRack32.
Chapter 4